-
- Item Height: 2.1ซม.
-
- Item Length: 10.7ซม.
-
- กล้องด้านหน้า กล้องมองหลัง สวิตช์ควบคุมอัตโนมัติ ที่จอดรถ ตัวแปลงช่องวิดีโอ ทริกเกอร์อัตโนมัติ กล่องควบคุมมุมมองด้านข้าง: plastic glass
-
- ประเภทรายการ: บริการช่วยเหลือที่จอดรถ
-
- น้ำหนักสินค้า: 0.51กิโลกรัม
-
- กล้องด้านหน้า กล้องมองหลัง สวิตช์ควบคุมอัตโนมัติ ที่จอดรถ ตัวแปลงช่องวิดีโอ ทริกเกอร์อัตโนมัติ กล่องควบคุมมุมมองด้านข้าง: reverse camera
-
- Item Width: 5.3ซม.
-
- กล้องด้านหน้า กล้องมองหลัง สวิตช์ควบคุมอัตโนมัติ ที่จอดรถ ตัวแปลงช่องวิดีโอ ทริกเกอร์อัตโนมัติ กล่องควบคุมมุมมองด้านข้าง: กล้องด้านหน้า กล้องมองหลัง สวิตช์ควบคุมอัตโนมัติ ที่จอดรถ ตัวแปลงช่องวิดีโอ ทริกเกอร์อัตโนมัติ กล่องควบคุมมุมมองด้านข้าง
-
- alarm type01: ด้านหน้า
-
- alarm type02: font side
-
- alarm type03: rear side
-
- alarm type04: vehicle backup cameras
-
- แรงดันไฟฟ้า: DC12v
(1)we don’t suggest the switch will be connected wireless camera, and all products can support PAL or NTSC, but don’t support PAL and NTSC at the same time.
(2), please select a good quality camera to connect. The poor camera can’t be identified by the control box.
(3)when the product ACC is on, Your screen is blue, The product will work properly.
After you install it, your camera doesn’t work, please check your camera’s quality and your connection. ขอบใจ.
Car Camera Video Control Box For Four Channels With Quad Split, With Mirror Switch For Each Camera
You can see 4 camera images in the same window
Car Cameras Image Switch Combiner Box
Power failure memory function:
1, long press “CH4” button, turn on, enabled Power off memory function. And then select the need for multi-screen mode. State of device memory multi-frame mode, The boot is the final state of the multi-screen mode.
2, long-press the “CH3” button, turn it on and Enable the switch to start the automatic image screen.
บันทึก:
Please use 5-12V car power or connect the cigarette lighter,
If you need to connect to ACC or battery please cooperate with wide
voltage power supply box;
If you need to show the picture of reversing the car, the Control box of
the power supply connects to the backup light.
Please note:
(1) The non-suggest switch will connect the wireless camera, and the entire product supports PAL and NTSC
But not support PAL and NTSC at the same time.
(2), please choose a good quality camera to connect. And the poor camera can not be determined by the control box.
(3) When the product, ACC on, blue screen, the product will work properly.
After installation, the camera does not work, please check your camera quality and connectivity. thank you.
Car Video Car Control Box for Four Channels With Quad Split, Mirror Switch For Each Camera
You can see 4 cameras in the same window
Package contains: