Working frequency: 425-450.5ميغاهيرتز
Transmission power: 1 Watt
Communication distance: 3.0km
Interface type: RS232/RS485
Product weight: 151 ± 5g
Product Introduction
Full duplex 433M wireless data transmission radio station, point-to-point (one-on-one, nonbroadcast) transmission. The module can send data while receiving it, without waiting for the reception to complete. The module has the function of Frequency Hopping and Spreading (FHSS), and both the transmitter and receiver will automatically synchronize hopping in up to 50 frequency points based on the hopping algorithm (users can customize the number and sequence of hopping), greatly improving anti-interference performance.
مواصفة
| RF parameters | Parameter values | notes | |||
| Working frequency band | 425~450.5 MHz | Factory default 433MHz | |||
| Transmission power | 30 dBm | Maximum power of approximately 1W | |||
| Receiver sensitivity | -109 dBm | Airspeed 64kbps | |||
| Air rate | 16k~128kbps | Factory default 64kbps | |||
| Measured distance | 3 km | Clear and open environment, maximum power, the antenna gain of 5dBi, the height of 2m, an airspeed of 64kbps | |||
| Hardware parameters | Parameter values | notes | |||
| Size | 82 * 62 * 25 mm | ||||
| Antenna form | SMA-K | ||||
| communication interface | RS232/RS485 | Baud rate support of 1200~115200, factory default 9600 | |||
| Interface method | DB-9/Crimping | Standard DB9 hole/3.81 terminal block | |||
| Cache capacity | 2048 bytes | Large cache area | |||
| Electrical parameters | minimum value | Typical value | Maximum value | unit | condition |
| supply voltage | 10 | 12 | 28 | v | |
| mission Current | 267 | 297 | 326 | mA | 30dBm（1W） |
| Waiting current | 36 | 40 | 44 | mA | |
| operation temperature | -40 | 20 | 85 | ℃ | |
| Working humidity | 10 | 60 | 90 | % | |
| storage temperature | -40 | 20 | 125 | ℃ | |
