TDD pa power amplifier
TDD PA Power Amplifier Module for DVB-T COFDM TX Transmitter transmission 5w
The pa power amplifier module realizes the power amplification output of the RF signal. When the input voltage is 28V, connect to COFDM modulation board, the output power can be up to 5W (+30Antas ng Pagiging Sensitibo)
Mga tampok
- Working frequency band: 815MHz~830MHz (more frequency is adjustable)
- RX Gain: 1dB+/-1dB
- TX Gain: 10dB+/-1dB
- TX Power: 5W
Pagtutukoy
Aytem | Parameter | Tala |
Dalas ng saklaw (MHz) | 815-830Mzh | accept modify according to buyer’s requirement |
Output power (W) | 5W | No ALC control |
In-band group delay (ns) | ≤50 | |
TX gain (dB) | 16±1.0 | Set gain according to customer requirements |
In-band fluctuation | ≤1dB | Peak |
Antas ng Input (Antas ng Pagiging Sensitibo) | +22±1.0 | |
Shoulder ratio (dBc) | ≤-30 | |
RX gain (dB) | 5 | |
RX Noise figure (dB) | ≤2.5 | |
RF switching level | +3.3V~+5V | High level send low-level receive |
Isolation | 50dB | |
Power supply requirements | +11V~+18V Vdc | |
RX operating current | ≤0.6A | |
TX operating current | ≤3.0A | |
Nagtatrabaho temperatura | -20~+70℃ | |
Uri ng Interface | SMA-50KFD | |
Module Dimension (mm) | 105 * 60 * 14 |
Shape and installation instructions
1. Mga Sukatan: 105 * 60 *14 (mm) (without socket)
2. Interface form:
1 power supply conditions: +12V power supply: plug
2 RF input interface: SMA-50KFD
RF output interface: SMA-50KFD
3. Mounting hole diameter size: 4 Φ3.5 through holes for 4 mounting holes for installation.
20W
Pagtutukoy
Aytem | Parameter | Tala |
Dalas ng saklaw (MHz) | 500-530Mzh | accept modify according to buyer’s requirement |
Output power (W) | 20W | No ALC control |
In-band group delay (ns) | ≤50 | |
TX gain (dB) | 48±1.0 | Set gain according to customer requirements |
In-band fluctuation | ≤1dB | Peak |
Antas ng Input (Antas ng Pagiging Sensitibo) | -80 | |
Shoulder ratio (dBc) | ≤-30 | |
RX gain (dB) | 5 | |
RX Noise figure (dB) | ≤2.5 | |
RF switching level | +3.3V~+5V | High level send low-level receive |
Isolation | 50dB | |
Power supply requirements | ≤+28 Vdc 20W/3A | |
RX operating current | ≤0.6A | |
TX operating current | ≤3.0A | |
Nagtatrabaho temperatura | -20~+65℃ | |
Uri ng Interface | SMA-50KFD | |
Module Dimension (mm) | 178 × 91 × 25 |
Power supply conditions:
+28V power supply: Pin 2
+12V power supply: Pin 3
Grounding: Pin 1
Mga review
May mga walang review pa.