2w pa power amplifier
2w PA Power Amplifier 185Mhz-215Mhz 12V 75ohms 6dbm input 33dbm output for DVB-T COFDM TX Transmitter transmission
PA pouvwa anplifikatè COFDM
Buyers requirement
- 2W power amplifier
- Frequency 185Mhz~215Mhz
- Input 75ohms 6dbm
- Output 33dbm
- 12V pouvwa Antre
The pa power amplifier module realizes the power amplification output of the RF signal. When the input voltage is 12V, connect to COFDM modulation board, the output power can be up to 2W (+33dbm)
karakteristik
- Working frequency band: 185MHz~215MHz
- Akeri: 45dB
- Power Amplifier out: +33dbm (PAR=9.9dB)
- ACPR: < -36dBc
- IP3: +49dbm
- Noise Figure: 6dB
- Pwovizyon pou vòltaj: 12V, output 2W (+33dbm) transmit power, power consumption is about 8.7W.
- RF interface: SMA male thread hole
Specification
Test items | Technical Indicators | Remak |
seri frekans (megaèrts) | 200±15 | |
SPAN (megaèrts) | 8 | |
Output power (W) | ≥2 | |
P1dB Output power (W) | 10 | |
Akeri (dB) | 28±1.0 | |
Pass Band Ripple | ≤1.0dB p-p | |
Antre pouvwa (dbm) | 6±1.0 | |
ACPR (dBc) | ≤-35@8M@2W | |
Power supply voltage | +12V~+17V Vdc | |
Group Delay | <1us | |
Working current | ≤1.2A | |
Tanperati seri | -20~+70℃ | |
Radiofrequency joint | SMA-50KFD | |
Module size (mm) | 81x48x14mm | without connectors |
Module weight | 89g | |
enpedans | 50 om |
Installation hole diameter size:
4 installation holes are left with 4*3.5mm through holes for installation.
Revi
Pa gen okenn revizyon ankò.