COFDM Wireless Video Receiver HDMI CVBS output
COFDM Wireless Video Receiver HDMI CVBS output mini modulator module long distance fpv UAV Data Transmission UART config Recorder
Work for COFDM-905T
HD digital wireless video transmission receiver COFDM-905R
Built-in Decoder board and COFDM dual-antenna receiving demodulation module, the whole machine adopts aluminum alloy casing, high receiving sensitivity, low decoding display delay, high-definition video output stable and clear.
Kenmerken
- Dual Antenna reception
- Support working frequency range: 160MHz~860MHz, the center working frequency can be configured;
- Wireless bandwidth is configurable;
- The sensitivity of dual antenna reception -100±1dbm (QPSK 8MHz);
- Wireless receiving status information (such as received signal strength, air interface rate, datasnelheid, werkfrequentie, draadloze bandbreedte, HDMI COFDM draadloos) can be superimposed/not displayed on the video screen through the OSD switch button, or output to the serial port (customized) ;
- Low-latency H264 video decoding, support 1080P@60 decoding playback;
- Audio and video output (HDMI, CVBS, USB port simultaneous output):
- HDMI Type A port audio and video output
- CVBS (Lotus Head) AV audio and video output
- Output video stream to the phone/tablet decoding display via USB port
- Support video receiving and decrypting function (matching with video encryption at the transmitting end);
- Support TF card or USB disk video recording;
- Provide one-way single-direction transparent data transmission serial port;
- Provide parameters to configure the serial port for working settings (such as center working frequency, draadloze bandbreedte, receiving decryption password);
- Stroomvoorziening: 6~15V, working power consumption is 230mA@12V.
- Machine size: 115x90x34mm
- Machine weight: 243 gram
connector:
- ANT-in: wireless signal input antenna interface, SMA external threaded inner hole
- HDMI: A type HDMI carrier, high-definition audio and video output interface
- CVBS: analog video output interface
- AL/AR: left and right channel analog audio output
- macht verbindingsstuk: 3PIN 2.54mm socket
- USB interface:
- External phone or tablet can be used to output audio and video to mobile phone or tablet for decoding display
- Recording video can be connected to an external USB flash drive or USB hard disk
- OSD button:
The receiving status information displays the on/off button, and the long press button can switch the switch status, and the switch status will be powered off. When the reception status information display is turned on, it is displayed in red in the upper left corner of the output video screen:- RF:338.0MHz BW:4.0MHz
QPSK CR:2/3 GI:1/16
AIR:3.90Mbps
VBR:3.05Mbps AES OFF
SIG1:27 SIG2:22
ber1:0.14% ber2:100.00%
REC OFF No Storage - RF indicates the center operating frequency, en BW indicates the working bandwidth.
QPSK is the modulation mode, CR is the convolutional code rate, and GI is the guard interval.
AIR is the air interface rate
VBR is the video bitrate, AES OFF means no encryption
SIG1 refers to the received signal strength near the HDMI port antenna, en SIG2 refers to the other antenna.
Ber1 refers to the BER error rate near the HDMI port antenna, en ber2 refers to another antenna.
REC OFF means no video storage
- RF:338.0MHz BW:4.0MHz
- When the wireless receiving signal is interrupted or weak, the output video screen will be interrupted (the re-received signal screen will be automatically restored), and display: Disconnected, no signal
- REC button: Video recording on/off button, short press button to switch state, start recording after power is detected. The system defaults to recording to the TF card. If the TF card is not inserted, it is recorded to the USB flash drive. If they are not inserted, they will not be recorded.
- Link indicator: The wireless receiving link working status indicator lights up after the system is started and blinks when the receiving signal is normal.
- REC indicator: The video recording indicator will flash at the low frequency when recording video, otherwise the high frequency will flash.
- PWR indicator: lichtnetindicatie.
- CFG serial port: Parameter configuration Serial port, you can configure wireless receiving related parameters, such as center working frequency, draadloze bandbreedte, decryption password, enz. Vcan provides a matching parameter configuration panel SconB to facilitate user parameter setting.
- Data serial port: Transparent data transmission serial port. The serial port data of the transmitter can be wirelessly transmitted to the receiver and output from the serial port.
- TF card interface: Used for software upgrade maintenance or for storing video.
Notitie
Wanneer de COFDM zender-905T en 905T-COFDM ontvanger vormen een point-to-point draadloze video transmissiesysteem, de video vertraging indicator:
De drie indicatoren videovertragingsduur, video bit rate, en luchtinterface rate zijn de wederzijdse beïnvloeding en wederzijdse terughoudendheid. Wanneer de luchtinterface frequentie hoger is dan 5 keer de video code rate, de video vertraging minimum. In dit geval, de eigenlijke test is dat de video vertraging is ongeveer 60 ms wanneer de code op 720p verzonden @ 60, en de video vertraging is ongeveer 130 ms bij 1080P @ 60. De vertraging betrekking op het tijdsverloop van de HDMI-ingang aan de zendzijde naar de HDMI-videobeelden aan het ontvangende einde, met uitzondering van de vertraging van de front-end camera van de zendende einde (maten we de vertraging van een merk SLR camera op ongeveer 70 Mevrouw, en de vertraging van een bekend merk sport camera op ongeveer 130 Mevrouw). Voor de meeste applicatie scenario's, de video vertraging wordt ingesteld op ongeveer 200 ms standaard.
Wanneer de COFDM-905T zender en de ontvanger COFDM-905R vormen een point-to-point draadloze video transmissiesysteem, de transmissie afstand:
De draadloze transmissie afstand is gerelateerd aan vele factoren, zoals de testomgeving, ambient elektromagnetische interferentie, occlusie voorwaarden, Lucht vochtigheid, werkfrequentie, draadloze bandbreedte, en het verzenden en ontvangen van antennes. Werkelijke testresultaten: een klant-test, onbemande vliegtuigen gemonteerd ST100 zender rondvliegen 100 meters hoog, ingesteld op 4M QPSK draadloze bandbreedte, 700MHz centrale werkfrequentie, 1W zendvermogen, zendantenne 3dBi buurt, Ontvangen dubbel glasvezel antenneversterking van ongeveer 10dBi, afstand tot 16km (video gladde); onze eigen straat test in Shenzhen, de lancering eind van het viaduct, gewone slang antenne (over 3dBi winst), 340MHz launch, QPSK 8M bandbreedte, fiberglas antenne aan de ontvangstzijde, en een Yagi antenne, wat betreft 2.2 meter hoog op de paal, 2.2 kilometer afstand, HD video gladde, een kleine hoeveelheid hoogbouw tussen de zender en ontvanger, de weg visueel over 20 graden buigen. Als gevolg van voorwaardelijke beperkingen, niet verder werden proeven op de weg gemaakt.
connector
Grootte
75 X 55 X 25 mm
RF Test van prestaties
Operating Center Frequency 470MHz, Power Amplifier: 1w
Operating Center Frequency 700MHz, Power Amplifier: 1w
Auto ISDB T Twee tuner Twee antenne HD MPEG4 TV-ontvanger ISDB T9821
Er zijn nog geen beoordelingen.