433Mhz wireless data transceiver 1-watt PA full duplex RS232 RS485 1km ground transmission with antenna

Frecuencia ar 'be̲fi: 425-450.5MHz
Transmission power: 1 Watt
Communication distance: 3.0km
Interface type: RS232/RS485
Be̲xu ar producto: 151 ± 5g

Product Introduction

Full duplex 433M wireless data transmission radio station, point-to-point (one-on-one, nonbroadcast) transmission. The module can send data while receiving it, without waiting for the reception to complete. The module has the function of Frequency Hopping and Spreading (FHSS), and both the transmitter and receiver will automatically synchronize hopping in up to 50 frequency points based on the hopping algorithm (users can customize the number and sequence of hopping), greatly improving anti-interference performance.

Especificación

RF parameters		Parameter values		notes
Working frequency band		425~450.5 MHz		Factory default 433MHz
Transmission power		30 Dbm		Maximum power of approximately 1W
Receiver sensitivity		-109 Dbm		Airspeed 64kbps
Air rate		16k~128kbps		Factory default 64kbps
Measured distance		3 km		Clear and open environment, maximum power, the antenna gain of 5dBi, the height of 2m, an airspeed of 64kbps
Hardware parameters		Parameter values		notes
Tamaño		82 * 62 * 25 mm
Antenna form		SMA-K
communication interface		RS232/RS485		Baud rate support of 1200~115200, factory default 9600
Interface method		DB-9/Crimping		Standard DB9 hole/3.81 terminal block
Cache capacity		2048 bytes		Large cache area
Electrical parameters	minimum value	Typical value	Maximum value	unit	condition
supply voltage	10	12	28	v
mission Current	267	297	326	Ma	30dBm（1W）
Waiting current	36	40	44	Ma
operation temperature	-40	20	85	° C
Humedad ar 'be̲fi	10	60	90	%
storage temperature	-40	20	125	° C

Manual usuario

Online User Manual or Download