Wireless HDMI Transmitter

Wireless HDMI HD Video Transmitter

Wireless HDMI Transmitter 30M Zero latency

Wireless HDMI Transmitter

● Support point-to-point, multi-point to point, broadcast transmission (Faahepo ore)

● Support Up to 1080P/60Hz

● Support devices with HDMI output, such as PC, Laptop etc.

● Support USB HID remote control (Faahepo ore)

● Support HDMI 1.3, compatible with EDID 1.1(HDMI 1.4 for 3D Optional)

● Support AES 128/256 image encryption

● Support WHDI 1.0 te mau faataaraa

● No latency, using real-time HD video transmission technology,

● Full hardware design, no software requested, plug-and-play

● Portable, high-end business application

● No less than 30 meters line of sight

Wireless HDMI Sender

ITEM

Wireless HDMI Transmitter

REMARK
Operating Frequency Free Frequency:5.15~5.25, 5.725~5.850 (GHz) DFS Frequency:5.25~5.35, 5.47~5.725, (GHz)

DFS Optional

Transmission power 12dBm
Antenna Mode PCB Antenna; Antenna Gain: 3dBi;
Maru 40MHz
Modulation Mode Forward Channel: OFDM 16-QAM; Return Channel: OOK
Data Rate Forward Channel: 3Gbps max.; Return Channel: 100Kbps max.
Network Mode point-to-point, multi-point to point, broadcast transmission (Faahepo ore)

Video Formats Supported

HD: 480api, 576api, 720api, 1080Ua, 1080api

PC: VGA (640×480), SVGA (800×600), XGA (1024×768), Panel: 854×800, 1280×768, 1366×768, 1920×1080

SNR > 23 dB @ (-60 < Rx Pin < -45) dBm
Audio Formats Supported PCM、AAC、Dolby roro uira 2.0/5.1、DTS 5.1、LPCM 5.1/7.1
Transmission Distance 30 metera(Video Quality Assessment 4) Indoor distance without barrier between transmitter and receiver

Indicator Status

Wireless connection indicator

On The transmitter is connected successfully in the wireless mode.
Flash slowly The transmitter is failed to connect in the wireless mode.
Flash rapidly The device is faulty

Video Indicator

On The video source is connected successfully.
Off The video source is failed to connect.
Vauvauraa HDMI(Tane); RAVE'A AP AP NA(311; Network Matching Button
Te mau ravea no te faatere i te mau ohipa DC 5V/1A; Usb Power Supply
Mana veivakarusai 1080P/3.5 W;720P/2.8W
Faito 78.06 X 25.02mm
Temperature Range 0 ~ 40°C (Te anuvera o te ohiparaa); -20 ~ 80°C (Te anuvera o te haaputuraa)
Regulatory Compliance TE MAU PARAU APÎ O TE EKALESIA;CE
Wireless HDMI HD Video Transmitter

● Suppor t point-to-point, multi-point to point transmission

● Suppor tUp to 1080P/60Hz

● Suppor t any HD display devices with HDMI, such as projector, LED T V

● Suppor t 38KHz IR remote control

● Suppor t USB HID remote control (Faahepo ore)

● Suppor t HDMI 1.3, compatible with EDID 1.1

● Suppor t AES 128/256 image encr yption

● Suppor t OSD, WHDI 1.0 te mau faataaraa

● No latency, using real-time HD video transmission technology

● Full hardware design, no sof tware requested, plug-and-play

● Low power consumption, por table, high-end business application

● No less than 30 meters line of sight

Wireless HDMI transmitter receiver module

ITEM

Wireless HDMI Receiver

REMARK

Operating Frequency

Free Frequency5.15~5.25, 5.725~5.850 (GHz) DFS Frequency:5.25~5.35, 5.47~5.725 (GHz)

DFS Option

Transmission power Power Output: 16dBm
Antenna Mode PCB Antenna; Antenna Gain: 3dBi;

Transmission Antenna: 1 Antenna; Receiving Antenna: 5 Antenna

Maru 40MHz
Modulation Mode Forward Channel: OFDM 16-QAM; Return Channel: OOK
Data Rate Forward Channel: 3Gbps max.; Return Channel: 100Kbps max.
Network Mode Point to Point/Multi-Point to point / point to Multi-Point

Video Formats Supported

HD: 480api, 576api, 720api, 1080Ua, 1080api

PC: VGA (640×480), SVGA (800×600), XGA (1024×768), UGA(1600×1200)

Panel: 854×800, 1280×768, 1366×768, 1920×1080

SNR > 23 dB @ (-60 < Rx Pin < -45) dBm
Audio Formats Supported PCM; AAC; Dolby roro uira 2.0/5.1; DTS 5.1; LPCM 5.1/7.1

Transmission Distance

≥ 30meters (Video Quality Assessment 4) Indoor distance without barrier between transmitter and receiver
Standard Protocol HDCP1.2; HDMI1.3(option HDMI1.4 3D )

Indicator Status

Wireless connection indicator

On The transmitter is connected successfully in the wireless mode.
Flash slowly The transmitter is failed to connect in the wireless mode.
Flash rapidly The device is faulty.
Video Indicator On The video source is connected successfully.
Off The video source is failed to connect.
Vauvauraa HDMI OUT(Vahine); DC INMINIUSB OUT; Network Matching Button
Te mau ravea no te faatere i te mau ohipa DC 5V/2A;
Mana veivakarusai 1080P/4.5 W;720P/4W
Faito 52 X 80 (mm)
Temperature Range 0 ~ 40°C (Te anuvera o te ohiparaa); -20 ~ 80°C (Te anuvera o te haaputuraa)
Regulatory Compliance TE MAU PARAU APÎ O TE EKALESIA; CE
Wireless HDMI how to work

Discover more from VC48.com

Subscribe now to keep reading and get access to the full archive.

Continue reading

Hinaaro i te tauturu?
Exit mobile version