2w pa power amplifier
2w PA Power Amplifier 185Mhz-215Mhz 12V 75ohms 6dbm input 33dbm output for DVB-T COFDM TX Transmitter transmission
PA power amplifier COFDM
Buyers requirement
- 2W power amplifier
- Frequency 185Mhz~215Mhz
- Input 75ohms 6dbm
- Output 33dbm
- 12Đầu vào nguồn V
The pa power amplifier module realizes the power amplification output of the RF signal. When the input voltage is 12V, connect to COFDM modulation board, the output power can be up to 2W (+33dBm)
Tính năng, đặc điểm
- Dải tần làm việc: 185MHz~215MHz
- Thu được: 45dB
- Power Amplifier out: +33dBm (PAR=9.9dB)
- ACPR: < -36dBc
- IP3: +49dBm
- Noise Figure: 6dB
- Cung cấp hiệu điện thế: 12V, output 2W (+33dBm) transmit power, power consumption is about 8.7W.
- RF interface: SMA male thread hole
Đặc điểm kỹ thuật
Test items | Technical Indicators | Nhận xét |
Dải tần số (MHz) | 200±15 | |
SPAN (MHz) | 8 | |
Output power (W) | ≥2 | |
P1dB Output power (W) | 10 | |
Thu được (dB) | 28±1.0 | |
Pass Band Ripple | ≤1.0dB p-p | |
Công suất đầu vào (dBm) | 6±1.0 | |
ACPR (dBc) | ≤-35@8M@2W | |
Power supply voltage | +12V~+17V Vdc | |
Group Delay | <1us | |
Công việc hiện tại | ≤1.2A | |
Phạm vi nhiệt độ | -20~+70℃ | |
Radiofrequency joint | SMA-50KFD | |
Module size (mm) | 81x48x14mm | without connectors |
Module weight | 89g | |
trở kháng | 50 om |
Installation hole diameter size:
4 installation holes are left with 4*3.5mm through holes for installation.
Đánh giá
Chưa có đánh giá nào.