2w pa power amplifier
2w PA Power Amplifier 185Mhz-215Mhz 12V 75ohms 6dbm input 33dbm output for DVB-T COFDM TX Transmitter transmission
PA power amplifier COFDM
Buyers requirement
- 2W power amplifier
- Frequency 185Mhz~215Mhz
- Input 75ohms 6dbm
- Output 33dbm
- 12V Power Input
The pa power amplifier module realizes the power amplification output of the RF signal. When the input voltage is 12V, connect to COFDM modulation board, the output power can be up to 2W (+33dBm)
Awọn ẹya ara ẹrọ
- Working frequency band: 185MHz~215MHz
- ere: 45Di
- Power Amplifier out: +33dBm (PAR=9.9dB)
- ACPR: < -36dBc
- IP3: +49dBm
- Noise Figure: 6Di
- Ipese folti: 12V, output 2W (+33dBm) transmit power, power consumption is about 8.7W.
- RF interface: SMA male thread hole
sipesifikesonu
Test items | Technical Indicators | Awọn ifiyesi |
igbohunsafẹfẹ ibiti o (MHz) | 200±15 | |
SPAN (MHz) | 8 | |
Output power (W) | ≥2 | |
P1Di Output power (W) | 10 | |
ere (Di) | 28±1.0 | |
Pass Band Ripple | ≤1.0dB p-p | |
Agbara titẹ sii (dBm) | 6±1.0 | |
ACPR (dBc) | ≤-35@8M@2W | |
Ipese agbara foliteji | +12V~+17V Vdc | |
Group Delay | <1us | |
Working current | ≤1.2A | |
otutu ibiti o | -20~+70℃ | |
Radiofrequency joint | SMA-50KFD | |
Module size (mm) | 81x48x14mm | without connectors |
Module weight | 89g | |
ikọjujasi | 50 Ohm |
Installation hole diameter size:
4 installation holes are left with 4*3.5mm through holes for installation.
Reviews
Nibẹ ni o wa ko si agbeyewo sibẹsibẹ.